Monster Factory

Chapter 391: Upgrading soon

When the HD camera was turned on by Master Juli and the robot's start button was turned on by Ye Qing, a curved led indicator light was illuminated from the head of the robot and after about half a minute, the robot has started.

"Robot connected successfully... Self-testing is normal and works."

Ye Qing is wearing panoramic glasses found that the picture in front of him was slightly clearer than his own picture and was an intelligent data picture. On the screen, there was a virtual grid in front of the robot. The user could use this virtual grid similar to the reverse image to determine the distance between the robot and the object. At the same time, there were harmful gas display meters and an air humidity indicator and a temperature display meter.

Without any unconscionable ideas, Ye Qing generously admitted that Amano Heavy Industries' product, in terms of auxiliary functions did better than of the Monster Heavy Industries.

Only a mobile phone-sized motherboard was needed, and this information could be easily integrated into the panoramic display of its explorer robot. Furthermore, its price was very cheap. In front of the increasingly mature electronic information technology, he could add these functions without any difficulty. He didn't do it before because he didn't have to advance the time to not grab the stage of the release of Xu Ninggong's new movie.

The robot is a bar of gold even if it was made of copper, in the end, it depends on its power system.

Knowing the new R&D production department has been designing auxiliary human-machine interaction functions and while thinking about it, Ye Qing quickly waved his hands. The robot immediately followed "click - click ～" and Ye Qing continued doing various actions to test its coordination. After two minutes, he had clearly felt that the manipulator still has the shortcomings of the traditional manipulator during the movement.

A fast cutting machine in the corner of the workshop became the target of his experiment. He operated this robot and slowly drive to the cutting machine, controlled it to pick up a standard 303 aluminum profile, and fed it under the cutting machine for cutting. He found some difficulty...

The three-claw grasping design made him unable to hold a hand gesture like his own product. The aluminum profile was caught several times before it was successfully clamped and fed under the cutting machine.

After experimenting with several functions, he finally let the Master Craftsman remove the protective shell of the all-around robot to study the internal structure.

The hydraulic servo motor was different from the customized product of the Monster Heavy Industry. The hydraulic and electric devices in this robot were all mass-production available models on the market. But when it comes to the movement structure, it was more and more similar to the design of the Mechanical Colossus Type I arm, this is well revealing and the automatic tool replacement design was exactly the same as its Mechanical Colossus Type I. There was also universal joints at mechanical joints.

Humans have joint surfaces plus ligaments to control bone movement and the machine has a universal joint, and a brace added to control the movement of the robot arm.

This was also one of the great difficulties of the robotic arm. A universal joint of the Monster Heavy Industry could precisely move at two hundred and forty degrees. The gimbal of this robot could be disassembled. After reading it, Master Jing told Ye Qing that it could only locate 96 degrees.

The fewer the nodes, the more rigid the movement of the natural robotic arm and the manufacturing difficulty are not the same and the cost price is linearly reduced. There are also struts, and the number here is also greatly reduced.

Amano Heavy Industries, either failed to manufacture the most technically difficult mechanical finger or wanted to compress the cost and changed it to a very simply three-claw type.

Compared with the Monster Heavy Industry, the gap between these two robots was obvious.

In actual operation, this point is also proved. Before Ye Qing controlled this robot, when doing some simple machining actions, he couldn't find the feeling of being driven by an arm. He had to slow down greatly and finish it little by little.

After the robot was completely disassembled, Ye Qing photographed the robot [Almighty] with a three-dimensional camera and then the Master Craftsman assembled it.

In all fairness, this robot is still far from the explorer robot in terms of a motion system. But this gap is not the gap between 0 and 1 in other terms. But the gap between 60 and 90.

Amano Heavy Industry was able to mass-produce a simplified version of the Mechanical Colossus Type I arm in a short time since it is worthy to rely on An Qi Heavy Industry, an industrial robot giant to produce this type of robot.

In the evening, the dispatched employees sent out had continuously sent back one after another news to the chemical industry about industrial equipment dealers in the two nearby provinces. It was like Ye Qing has guessed; this all-round robot secretly squeezed the explorer robot's sales to nearly half within a few days. Many functions, cheap price was only one aspect.

Through a preliminary investigation, he found that the reason why this robot really quietly squeezed out its product share was Amano Heavy Industries, which has established a huge product sales network with An Qi Heavy Industries.

Although An Qi Heavy Industries was abroad, it had occupied the first throne of industrial robots for decades, and its products have covered monopoly oligarchs in almost all industrial countries in the world. Their agents and distributors are everywhere in the country, but it is not too simple to promote new products.

Ye Qing doesn't have a taste in his heart. This robot is not like the electric car that was painted before and completely copied. In addition to the core power structure imitating the Mechanical Colossus Type I, the rest try to be different from the explorer.

Ye Qing was angry among the An Qi Heavy Industry, which is a terrible sales network worldwide.

In the beginning, his subsidiary Amano Heavy Industries came to see him and said he can help promote the Mechanical Colossus Type I globally. Now that they have similar products, they can sell the products to the world in a short time.

Now that the explorer robot can’t keep the domestic market, what can say to get out to the world?

Although the explorer didn't have these functions, it has several grades better than the all-around model launched by Amano Heavy Industries. When the product R & D department will add these technical simple auxiliary functions, the domestic market will be able to be snatched back after a short time. But until that time, the products would be sold all over the world, and the profits would be lost.

"So, let's use technology and technology to compete and see who can laugh to the end." Ye Qing was angry at the same time, also raised a high spirit of fighting. This fighting spirit gave Ye Qing a feeling of blood boiling.

Yes!

Since he wanted to have the number, one technology factory in the world, how could it be smooth sailing, how can other established factories catch its market share being eaten up, and watch himself pulled down?

Then show your magical powers and see who has the greatest ability.

"Boom~Boom~"

Outside the workshop, there was a deep and heavy noise. This voice lifted Ye Qing's spirit and immediately walked out of the workshop to the transit warehouse. On the way, he could clearly see that on the distant Huanhai Avenue, a long black heavy truck roared. This was a fleet of Volvo 750's top-heavy trucks. Behind each heavy truck was a section of automatic leveling containers carrying a five-axis machining center that Ye Qing spent heavily on ordering it.

Today, these batches of processing centers will allow Monster Heavy Factory to take the tenth place in Jiangnan province's manufacturing industry and after winning the tenth, Monster Heavy Factory would be advanced to a brand-new fifth stage.